|
Classifieds
Locost championship
2nd place Racecar for sale
Complete ready to race 2011 Locost racecar including
spares package.
As raced by Nick Morley to lead the Locost series for most of 2011 and finish
close 2nd behind Scott Mittell.
Nick came from 9th place to 2nd in final round at Cadwell and has won 4 rounds
during the 2011 season, with numerous fastest laps and qualifying pole positions
(e.g. Donington pole by 1 second)
This car is demon quick, light, very reliable (no DNFs) and easy to drive at the
limit!
Painted in bright deep orange and black, it cuts a striking and purposeful image
in the paddock and on the track.
Chassis is a Stuart Taylor design and was largely rebuilt for 2011.
Randall tuned engine has recently been blueprinted and refreshed followed by
dyno for maximum legal output (July 2011)
All parts checked and are 100% legal under regs.
Spares include wets wheels and tyres. Spare engine block, rebuilt spare gearbox,
Diff, bodywork and a variety of other bits such as oil pump etc.
Car has been properly and professionally built, run and maintained for 2 years
by Stephen Hills at Allied Motorsport/ LRC in Peterborough.
There is a brian james trailer available separately.
Spec Details
Stuart Taylor Locost Chassis modified by LRC Motorsports.
Westfield type Roll Cage fitted by Caged Ltd - with relevant MSA Paperwork.
Stuart Taylor Top/Bottom Wishbones and Trailing arms.
Adjustable Panhard Rod.
Stuart Taylor bodywork with LRC Front wings painted Orange.
Brian Randall Engine - Refreshed July 2011.
Type 2 4 speed GT Gearbox with remote gear lever.
Escort Mark 2 Rear Axle with 4.1 Diff.
3 Core Radiator - Re cored August 2011.
Rally Design Escort Mk 2 quickrack 2.4 turns.
Gaz Dampers
20 Litre Aluminium Fuel Tank.
Facet Fuel Pump
Kirkey Aluminium Seat.
Schroth 6 point harness (HANS compliant).
Stack Instruments.
Lap Timer
EBC Green Spot Pads with standard rear shoes.
Varley Battery
Fire Extinguisher refilled - March 2011.
This car will sell quickly, so don't delay
Call Stephen on 07803 049712 or email
shills51@yahoo.co.uk
* * *
 
Anyone interested in a new
14ft GRP Fishing Dinghy. it is 5'10"
wide, comes with various seating options and in a variety of colours to suit.
There
is rubber fendering around the deck with 3 x cleats for mooring. 2 x aft and 1 x
fore).
This is a professionally built product not a back
yard project. High quality throughout.
Retail
price wil be approximately £950 + VAT. cost may vary with colours
and spec.
Tel: 07906 668574 and ask for Glenn
| 
